M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring - 圖片 1

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring - 圖片 2

點擊放大

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring - 圖片 3

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring - 圖片 4

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring - 圖片 5

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring - 圖片 6

M12.1-1.25 x 15mm Oil Drain Plug Oversize Piggyback, Stainless Steel Self Tapping Oil Pan Thread Repair Kit with O-Ring

产品倒计时

限時優惠

幾乎售罄

免費退貨

距離結束還有時間：

$13

尺寸

M12*1.25

M12*1.5

M12*1.75

M14*1.25

M14*1.5

M16*1.5

M18*1.5

清除

快遞 2 天內送達

描述
評價 (0)

特色：
The oil drain plug is made of sturdy 304 stainless steel
The red copper gasket is made of high-quality pure copper
The high-quality rubber sealing the O-ring can keep the oil from leaking after the installation is completed
It can help you to prevent the whole pot from being replaced due to slippage oil drain plug

Specification:
Material: Stainless steel
Size: M12*1.25/M12*1.5/M12*1.75/M14*1.25/M14*1.5/M16*1.5/M18*1.5
Package: 4.13*2.56*0.98 in
Weight: 1.62 oz

Fitment:
Toyota. Nissan. Geely

Package Include:
1* Oil drain plug
1* Wrench
2* O-rings
2* Gaskets

Installation Method:
1. Clean the oil pan before installation to ensure that the area and threads are free of excess oil and impurities.
2. Thread the piggyback plug into the hole. forward a few turns. then back a few turns.
3. After the plug bottoms out. remove it. then clean up the iron chips around the punch hole
4. Using a T-socket wrench. torque the plug to approximately 14ft-lbf.
5. After installing the piggyback plug. screw in the small piggyback oil drain plug. and the installation is complete (Note: When removing the small oil drain plug. please ensure that the large piggyback plug is in a fixed state)